Skip to main content
SAS-DVRODR22

Wildlife Camera 12.0 MPixel

Mount this wildlife camera to a tree and capture up-close video images of animals in the wild. The camera features night vision and a splendid trigger time so no more excuses to miss that one shot.

Specifications
Type Stand-Alone
Video resolution 1280x720
Camera Design Miniature
Screen size 1.4
IP rating IP44
Colour Leaves
Features Very low Energy Consumption
Storage type SD
Interface USB
Battery type 4x AA/LR6
Viewing angle 52
Night Vision 10.0
Detector angle 55
Image Chip 1/2.5 CMOS
Input Voltage 6
Operating Temperature -20 - 60
Megapixel 12.0
Detector range 25.0
Package contents
1x digital camera
1x USB cable
1x mounting strap
manual
Downloads
Product datasheet

How do I access and use the menu?

Set the switch to setup press menu. Use up and down to scroll through the main menu. Press ok to enter a certain menu. Use left and right to change the value of the particular option.

explanation of PIR interval

how often do you want it to scan for movement.

consequence of PIR trigger high, normal or low

high is sensitive: it will respond to smaller movements.

why and how use the timelapse

timelapse is a mode that takes pictures at certain intervals. Afterwards you can play this as a video. it looks like it is fast forwarded.

which video length should i use and why

that's up to you. there is no right or wrong.

how to use the on/off switch

to turn the camera on and off

when use the record button

This is for manual recording. typically this is not used.

how to use the mode button

mode is photo or video (do you want it to record a photo, video or both?)

What means PIR and how to use it

PIR is the motion detection. Turn it on to make the camera record when it sees motion

When use video size 640x480 or 1280x720

Lower resolution means lower quality but you can store more video on your memory card, We recommend 1280x720 for best results

What is photo burst?

Taking multiple photo's in rapid succession

Difference between photo sizes

Difference between photo sizes: the resolution of the photo or video

How Do I use the menu?

- Set the switch to setup (middle position) - Press menu - Use up and down to go to camera mode - use left and right to change it to video if needed. - Press down to set the clock. press enter to go into the date and time menu. - Exit this menu and go to video size and select the resolution you want (1280x720 is the highest resolution) - The next option is the video length. How long do you want it to record after a detection. - Timelapse is an option that will have the camera take picture every 5 minutes (or 10, 15, 20 etc) and then stitches it into a video. - PIR trigger: here you can set the sensitivity of the motion detection. - PIR interval sets how often you want to scan with motion detection. - Camera position is only a tag you can give your camera if you have more than one camera (camera 1 , camera 2 etc)

What does Camera Position mean?

This option allows you to give a camera aunique name so you can keep multiple camera's apart.

what is Camera Posit

It's the name of the camera, it is easier to keep multiple camera's apart.

Where to buy?

Find out where to buy König products,
online or in a local store
Konig