
Discover what's new!
Find new König products and check out the latest trends.

Amplifier with gain and slope control and four outputs to connect to a home installation to receive ultra-clear TV signals. It also creates an active return path which supports interactive TV and a cable (internet) modem.
Specifications | |
---|---|
No. of outputs | 4 |
Application | CATV |
Noise figure | 10 dB |
No. of inputs | 1 |
Usage | Indoor |
Power plug | Euro / Type C (CEE 7/16) |
Input voltage | 12 V |
Features | Active Return Path |
Gain | 20 dB |
Colour | White |
Return path | Active |
Connector type | F-connector |
Power consumption in operating mode | 250 W |
Slope control | 0-18 dB |
Frequency range | 86-1006 MHz |
Return frequency range | 5-65 MHz |
Gain control | 0-18 dB |
Impedance | 75 Ohm |
Max. return path | 11 dB |
Output level | 102 dBuV |
No. of outputs | 4 |
Application | CATV |
Noise figure | 10 |
No. of inputs | 1 |
Usage | Indoor |
Power plug | Euro / Type C (CEE 7/16) |
Input voltage | 12 V |
Features | Active Return Path |
Gain | 20 |
Colour | White |
Return path | Active |
Connector type | F-connector |
Power consumption in operating mode | 250 |
Slope control | 0-18 |
Frequency range | 86-1006 |
Return frequency range | 5-65 |
Gain control | 0-18 |
Impedance | 75 |
Max. return path | 11 |
Output level | 102 |
Package contents | |
---|---|
1 x antenna amplifier 1 x power adapter 1 x installation material manual |
1 x antenna amplifier 1 x power adapter 1 x installation material manual |
Downloads |
---|
Product datasheet |
FAQ |
What is the best place to connect a CATV amplifier? Place the amplifier as close to the point the signal enters your house as possible. You want to amplify the best signal. If you amplify a weak signal, it will amplify the bad part of the signal too. This leads to an even worse signal. |
Product datasheet |
What is the best place to connect a CATV amplifier? Place the amplifier as close to the point the signal enters your house as possible. You want to amplify the best signal. If you amplify a weak signal, it will amplify the bad part of the signal too. This leads to an even worse signal. |
Find new König products and check out the latest trends.
Discover the most popular König products.